Rhodium: Earth’s Rarest and Most Expensive Precious Metal

On Christmas Eve in 1800, English scientist a piece of nearly pure platinum ore, secretly purchased and smuggled from the Spanish colony of Nueva Granada (Colombia, today) for £795 ($1,051. 99 in 1800 — $23,206. 23 today).

He had high hopes, believing he could create a new that would make the solid ore a malleable platinum. The sample had secrets of its own — a new, previously unknown to science. Advertisement Today, it’s the most valuable precious metal on the planet: , a chemical element with the symbol Rh and atomic number 45.

With his chunk of smuggled platinum ore, in a few years Wollaston did what earlier scientists could not: He achieved a chemical process that isolated platinum and rendered it malleable. As the scientist dissolved the ore in his backyard garden laboratory, he produced both a soluble and non-soluble residue. After precipitating the soluble solution, he noticed that reddish remained.

Advertisement Red salts are not typical of platinum, and Wollaston suspected something else was present in the sample. In 1803 and 1804, Wollaston announced that with the sample of platinum ore, he discovered two other precious metals. One he called palladium, and the other, rhodium.

Advertisement Rhodium is an ultra-shiny, metal that had become useful in many industries including the automobile, jewelry, chemical and electrical trades. According to Shaun Peterson, (GIA) supervisor of jewelry manufacturing arts research and development, it’s rhodium’s scarcity and use that makes it so valuable. “Its rarity and the large global demand due to the use in car manufacturing makes the rhodium price go up considerably,” says Peterson.

New regulations for cleaner emissions in the automobile industry, particularly in China and Europe, are most likely to blame for the increase in rhodium prices. Advertisement Today, the of rhodium is $14,000 per ounce. Compare that to platinum at $959/ounce, palladium at $1,866/ounce or gold at $1,783/ounce.

Rhodium is never found in its purest form. Rather, it’s almost always collected as a minuscule byproduct of platinum, copper and nickel refining. If you want to go looking for rhodium, you better catch a plane to , the largest producer of rhodium by way of the country’s massive platinum mining operations.

You can also find it in river sands of North and South America, or in the copper-nickel sulfide ores in A Rose (Metal) by Any Other Name Wollaston called one of the new metals rhodium — rooted in the Greek word for rose, ” ” — because of the reddish salts that had dissolved in the aqua regia. ( is a yellow-orange, fuming liquid, so-named by alchemists because it can dissolve the noble metals gold and platinum. ) “Rhodium is a part of the platinum metals group, which is considered one of the noble metals,” says Peterson.

Other Platinum Metals There are six platinum group metals ( ): They have similar characteristics and are most often found together in nature. Like and silver, they are also precious metals. “Some of the key traits that precious metals share are allure, workability, durability and rarity,” notes Peterson.

Advertisement People have been mining rhodium as a by-product of platinum , after large sediments of platinum ore were found in the Transvaal in South Africa. Since that time, there’s never been concrete evidence of harm to humans, especially since it’s highly unlikely for a human to come into direct contact with a substantial amount of rhodium. Tests on plants indicate that rhodium is the least toxic member of PGMs, but because there is such a low naturally occurring rhodium supply, no tests have been done on humans.

Advertisement However, when breathed in, rhodium can be dangerous, Peterson says, particularly in jewelry making. “During the [rhodium] plating process, there are fumes that can be harmful. Due to this health risk, there are safety methods used when plating jewelry to avoid inhalation.

” What do you, cars, jewelry and have in common? Turns out, a bit of rhodium. Of available rhodium, 80 percent is used in catalytic converters in cars to clean exhaust emissions. Rhodium is uniquely exceptional at breaking down nitrous oxide molecules — aka, NOx emissions — the brownish, poisonous gas given off by fossil-fuel powered cars, trucks, boats, power plants and turbines, among many other offenders.

Advertisement Though the emissions cause irreparable damage to our bodies and ozone, it would be a lot worse without rhodium. Rhodium is also an essential catalyst for making nitric acid, acetic acid or hydrogen reactions, as well as a catalyst for making menthol — the minty flavor in chewing gum. Because it’s resistant to corrosion and conducts electrical current easily, rhodium is used as a coating for and optical mirrors, headlight reflectors and electrical materials.

Humans are most likely to directly encounter rhodium in shiny, lustrous jewelry. “Jewelers seek rhodium to use in the jewelry making process because it is bright, silvery white in color and very hard, which can help make the jewelry more scratch- and corrosion-resistant,” says Peterson. “It is also hypoallergenic which can help those that may be allergic to certain jewelry metal alloys.

” Rhodium contains no trace of nickel, so even the most sensitive jewelry wearers can rest assured that their wrist is safe with a rhodium-plated bracelet. Advertisement Rhodium is extremely hard and has a very high melting point at 3,565 degrees F, or 1,963 degrees C. Due to its higher melting point, it is more difficult for jewelers to manipulate than other metals.

“Rhodium by itself is too hard for general jewelry making purposes,” says Peterson. “The most common use for rhodium is as a plating over other metal alloys, either to help protect against allergies, or to improve the color of the jewelry item. ” Advertisement Its luster, shine and durability are definite pros to this rare metal, but because it’s so hard to work with, its plating is thin and wears off quickly.

“The con,” says Peterson, “is that the rhodium plating is only a thin layer coating jewelry. This means that over time the rhodium will reduce due to wear and tear. ” Jewelry makers to use rhodium on pieces that experience less rubbing and wear, like earrings or necklaces, and they recommend replating pieces every one to two years.

Because you need so little rhodium to plate a piece of jewelry, it’s relatively affordable. You can find rhodium-plated jewelry online anywhere from $300-$5,000, but difference in price has more to do with the designer, base metal and inclusion of , than the rhodium itself. Thanks to Wollaston’s discovery of rhodium more than 200 years ago, we can wear and drive our planet’s most precious and pricey metal.

In the non-soluble materials left after dissolving the platinum ore, Wollaston’s less famous partner, Smithson Tennant, : osmium and iridium. Advertisement.